• <tr id='nw2s2g'><strong id='nw2s2g'></strong><small id='nw2s2g'></small><button id='nw2s2g'></button><li id='nw2s2g'><noscript id='nw2s2g'><big id='nw2s2g'></big><dt id='nw2s2g'></dt></noscript></li></tr><ol id='nw2s2g'><option id='nw2s2g'><table id='nw2s2g'><blockquote id='nw2s2g'><tbody id='nw2s2g'></tbody></blockquote></table></option></ol><u id='nw2s2g'></u><kbd id='nw2s2g'><kbd id='nw2s2g'></kbd></kbd>

    <code id='nw2s2g'><strong id='nw2s2g'></strong></code>

    <fieldset id='nw2s2g'></fieldset>
          <span id='nw2s2g'></span>

              <ins id='nw2s2g'></ins>
              <acronym id='nw2s2g'><em id='nw2s2g'></em><td id='nw2s2g'><div id='nw2s2g'></div></td></acronym><address id='nw2s2g'><big id='nw2s2g'><big id='nw2s2g'></big><legend id='nw2s2g'></legend></big></address>

              <i id='nw2s2g'><div id='nw2s2g'><ins id='nw2s2g'></ins></div></i>
              <i id='nw2s2g'></i>
            1. <dl id='nw2s2g'></dl>
              1. <blockquote id='nw2s2g'><q id='nw2s2g'><noscript id='nw2s2g'></noscript><dt id='nw2s2g'></dt></q></blockquote><noframes id='nw2s2g'><i id='nw2s2g'></i>
                您好,欢迎进入东莞市科思德塑胶科技有為了擊殺你限公這雷神之錘司网站!

                全国咨询热线

                13751279945

                科思德塑胶

                EXTEM(热塑性聚酰亚胺)VH1003P/沙伯基础/物性表参数

                责任编辑:文和林发表时间:2020-12-10
                SABIC(沙伯基础)的EXTEM  VH1003P是一种透明热塑性聚酰亚胺(TPI)树脂,该产品具有玻璃化转变温度(Tg)为247C,是VH1003粉状材料。
                TPI VH1003P
                以下是EXTEM(沙伯基础)VH1003P/TPI(热塑性聚酰亚胺)物性表参数
                MECHANICAL        
                Tensile Stress, yld, Type I, 5 mm/min   96 MPa ASTM D 638
                Tensile Stress, brk, Type I, 5 mm/min   96 MPa ASTM D 638
                Tensile Strain, yld, Type I, 5 mm/min   6 % ASTM D 638
                Tensile Strain, brk, Type I, 5 mm/min   50 % ASTM D 638
                Tensile Modulus, 5 mm/min   3510 MPa ASTM D 638
                Flexural Stress, brk, 1.3 mm/min, 50 mm span   159 MPa ASTM D 790
                Flexural Stress, yld, 2.6 mm/min, 100 mm span   155 MPa ASTM D 790
                Flexural Modulus, 1.3 mm/min, 50 mm span   3170 MPa ASTM D 790
                Tensile Stress, yield, 5 mm/min   95 MPa ISO 527
                Tensile Stress, break, 5 mm/min   78 MPa ISO 527
                Tensile Strain, yield, 5 mm/min   8.5 % ISO 527
                Tensile Strain, break, 5 mm/min   50 % ISO 527
                Tensile Modulus, 1 mm/min   3110 MPa ISO 527
                Flexural Stress, yield, 2 mm/min   123 MPa ISO 178
                Flexural Modulus, 2 mm/min   3080 MPa ISO 178
                Ball Indentation Hardness, H358/30   140 MPa ISO 2039-1
                IMPACT        
                Izod Impact, unnotched, 23°C   NB J/m ASTM D 4812
                Izod Impact, notched, 23°C   69 J/m ASTM D 256
                Izod Impact, notched, -30°C   74 J/m ASTM D 256
                Instrumented Impact Total Energy, 23°C   33 J ASTM D 3763
                Izod Impact, unnotched 80*10*4 +23°C   NB kJ/m² ISO 180/1U
                Izod Impact, unnotched 80*10*4 -30°C   NB kJ/m² ISO 180/1U
                Izod Impact, notched 80*10*4 +23°C   4 kJ/m² ISO 180/1A
                Izod Impact, notched 80*10*4 -30°C   5 kJ/m² ISO 180/1A
                Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm   NB kJ/m² ISO 179/1eU
                Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm   NB kJ/m² ISO 179/1eU
                THERMAL        
                Vicat Softening Temp, Rate B/50   242 °C ASTM D 1525
                HDT, 1.82 MPa, 3.2mm, unannealed   217 °C ASTM D 648
                HDT, 0.45 MPa, 6.4 mm, unannealed   237 °C ASTM D 648
                HDT, 1.82 MPa, 6.4 mm, unannealed   230 °C ASTM D 648
                CTE, -40°C to 150°C, flow   5.E-05 1/°C ASTM E 831
                CTE, -40°C to 150°C, xflow   5.E-05 1/°C ASTM E 831
                Thermal Conductivity   0.22 W/m-°C ASTM E 1530
                CTE, 23°C to 150°C, flow   5.E-05 1/°C ISO 11359-2
                CTE, 23°C to 150°C, xflow   5.E-05 1/°C ISO 11359-2
                Ball Pressure Test, 125°C +/- 2°C   Passes - IEC 60695-10-2
                Vicat Softening Temp, Rate B/50   242 °C ISO 306
                Vicat Softening Temp, Rate B/120   238 °C ISO 306
                HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm   228 °C ISO 75/Af
                PHYSICAL        
                Specific Gravity   1.3 - ASTM D 792
                Mold Shrinkage on Tensile Bar, flow   0.5-0.7 % SABIC method
                Mold Shrinkage, flow, 3.2 mm   0.5-0.7 % SABIC method
                Mold Shrinkage, xflow, 3.2 mm   0.5-0.7 % SABIC method
                Melt Flow Rate, 367°C/6.6 kgf   15.5 g/10 min ASTM D 1238
                Density   1.3 g/cm³ ISO 1183
                Water Absorption, (23°C/saturated)   1.75 % ISO 62-1
                Moisture Absorption (23°C / 50% RH)   0.6 % ISO 62
                Melt Volume Rate, MVR at 360°C/5.0 kg   8 cm³/10 min ISO 1133
                OPTICAL        
                Light Transmission, 2.54 mm   58 % ASTM D 1003
                Haze, 2.54 mm   2 % ASTM D 1003
                ELECTRICAL        
                Dielectric Strength, in oil, 3.2 mm   17 kV/mm ASTM D 149
                Relative Permittivity, 100 Hz   3.41 - ASTM D 150
                Relative Permittivity, 1 kHz   3.41 - ASTM D 150
                Dissipation Factor, 50/60 Hz   0.025 - IEC 60250
                Dissipation Factor, 100 Hz   0.008 - IEC 60250
                Dissipation Factor, 1 kHz   0.001 - IEC 60250
                Dissipation Factor, 1 MHz   0.007 - IEC 60250
                Comparative Tracking Index   175 V IEC 60112
                FLAME CHARACTERISTICS        
                Glow Wire Flammability Index 960°C, passes at   3.2 mm IEC 60695-2-12
                Glow Wire Ignitability Temperature, 3.0 mm   850 °C IEC 60695-2-13
                Oxygen Index (LOI)   45 % ISO 4589
                Injection Molding        
                Drying Temperature   150 °C  
                Drying Time   4-6 hrs  
                Drying Time (Cumulative)   24 hrs  
                Maximum Moisture Content   0.02 %  
                Melt Temperature   380-405 °C  
                Nozzle Temperature   375-400 °C  
                Front - Zone 3 Temperature   380-405 °C  
                Middle - Zone 2 Temperature   370-395 °C  
                Rear - Zone 1 Temperature   360-380 °C  
                Mold Temperature   135-165 °C  
                Back Pressure   0.3-0.7 MPa  
                Screw Speed   40-70 rpm  
                Shot to Cylinder Size   40-60 %  
                Vent Depth   0.025-0.076 mm
                想更多的了解EXTEM(沙伯基础)VH1003P/TPI(热塑性聚酰亚胺)物性表参数,请点击以下PDF文档下载:
                EXTEM(热塑性聚酰亚胺)VH1003P/沙伯基础/物性表参数

                温馨提示:
                本物性表参数提供恭敬開口道者不承担任何法律责任,建议在选择材料前,就数据值与塑胶材料厂商进行验证。版权归原作者所有,如有侵权请立即与我们联系.
                13751279945